OGS07 Historic Shops Section Mould O Scale For Sale

OGS07 Historic Shops Section Mould O Scale OGS07 Historic Shops Section Mould O Scale

O Gauge  Historic Shops & Sections

This casting mould produces stone faced building parts (SHOPS and Shop wall SECTIONS) - these are the foundation of you buildings and can be combined to make buildings as can be seen in our galleries, the principles are the same as in all our free building plans.

We have several moulds in our OGS range, including windows, doors, church parts, roofs and many more. so you can build with a selection of our moulds and add to your building capabilities by just adding more from our range.

You can cast in plaster (Herculite or Tuffcast) or even in fast cast resins (That are like plastic and much more durable.

Make as many casted parts as you need, layout your building idea, and when your happy with the look, just glue the parts together.

Designed for model railway scenery layouts and buildings in O Scale (O Gauge) - 7mm

Product Overview

Casting mould. Cast these moulds with our Tuffcast casting powder or Herculite or even polyurethane Resin to make custom casts that can be used to make model railway buildings. See all our other Model making moulds and build up your collection to extend your building capabilities.

 

Casting is easy, just mix your preferred plaster, with water, pour into the casting mould, level off with a spatula and allow to dry for around 1 hour. Extract your parts from the mould and repeat to build up a stock of building parts. Then glue together with PVA glue or superglue if using resin casted parts.

Casting is simple, use any casting plaster or resins with our moulds and extract your parts, can be used over and over so you can create a lot of scenery parts very cheap and effective. If you also spray your moulds with a little water before use you will obtain better castings.

Have you seen our resin cast new Plaster Casting Video https://youtu.be/cyTh-oMHwTY

We recommend Tuffcast plaster, just mix with water in a plastic cup, pour into the mould, flatten off with a spatula and within 30 minutes you will have nice flat castings that are made of real stone and very easy to glue (Using PVA woodwork adhesive), paint and weather.

If you are casting in resin, the parts can be glued using superglue.

Moulds should be washed after use with warm soapy water and always stored flat to maintain the products life.

We have casting videos on scalecast.co.uk

You can also find our videos on YouTube, just search for scalecast and you will find us.

Please note:-We ship orders on Tuesdays and Thursdays each week

---