VTG PIONEER SX-1000 TW STEREO RECEIVER 1971 \"NEEDS TUNE UP\" TESTED WATCH VIDEO For Sale

• You are offerding on a 1971 Pioneer SX 1000 TW solid state receiver. It has a thick, solid plywood case with walnut veneer on outside, and a very conservative, 1960\'s look to it.
• Tuning range: FM, MW
• Dimensions: 405 x 137 x 350 mm.

Power output: 50 watts per channel into 8Ω (stereo)

Frequency response: 20Hz to 50kHz

Total harmonic distortion: 0.5%

Damping factor: 25

Input sensitivity: 2.4mV (MM), 51mV (ceramic), 200mV (DIN), 200mV (line)

Signal to noise ratio: 80dB (MM), 90dB (line)

Speaker load impedance: 4Ω to 16Ω

Semiconductors: 4 x IC, 1 x FET, 42 x transistors, 34 x diodes

Overview: Decent power output at 50 WPC, excellent S/N ratio of 80-90 DB, good damping and sensitivity, rock-solid construction with real wood cabinet, excellent power amps and internal components (for the day). I looked online you can download the Installation /operation/service manual.

DSCF0953 9 - YouTube

Video will open in a new rate is for Continental USA only but not for P.O. boxes because this limits me to use the Post Office only. If outside Continental USA or using P.O. box contact me for shipping rate.