Leadwell MCV-1300P 3-Axis Vertical Machining Center with FANUC CNC Unit OMF For Sale

Leadwell MCV-1300P 3-Axis Vertical Machining Center with FANUC CNC Unit OMF

Dear buyers, this lot represents theLeadwell MCV-1300P 3-Axis Vertical Machining Center (year 1994). This MCV-1300P wascarefully inspected and repaired in our repair facility. We have prepared a short video with MCV-1300P test run.

Specifications

• Working surface of table:66.9\" x 27.6\"
• Table load capacity: 2200 lbs.
• Spindle speed range, direct drive: 40-4000 r.p.m.
• Spindle taper: CAT50
• Minimum/Maximum distance from spindle nose totable surface:7.9\"/31.5\"
• Distance from spindle center to column: 23.6\"
• X-axis travel: 52\"
• Y-axis travel: 29.9\"
• Z-axis travel: 22\"
• Rapid feed rates (X, Y, Z axes): 394 I.P.M.
• Number of tools in changer: 20
• Maximum tool diameter (with adjacent tools): 4.9\"
• Maximum tool length: 9.8\"

ThisLeadwell MCV-1300P 3-Axis Vertical Machining Center is equipped with:

• #OM-F FANUC CNC control
• Box-way design
• (20) Position armless carousel-type automatic tool changer
• Rigid tapping
• Spindle air blow system
• AC servo motors on all axes
• Telescopic way covers
• Heat exchanger
• Leveling pads
• Work light
• Centralized lubrication system
• Coolant system with external tank
• 20 H.P. AC spindle drive

Shipping
Freight only (approx. weight is 17 000 lbs).
Buyer is responsible for dismounting the machine and arranging thefreight .Our facility is located at the222 William St, Bensenville, IL 60106. Please call[phone removed by ] for additional details.

Extended Warranty Available

Lakeside CNC Group, Inc. offers an extended warranty for thisLeadwell MCV-1300P.Please call[phone removed by ] and name the machine for additional details.
14 day money-back guarantee.

Our valued customers must accept our store policies, terms, and conditions as described below before ordering. Please read the information below for your convenience. Thank you!

If you have any questions or concerns, please call us [phone removed by ], we\'re here to help.

Listing policy

• We do not include operating systems, drivers, CD or software unless specified in the description.
• We are not responsible for any compatibility issues with your working environment, equipment or software.
• If something it\'s not listed, it\'s not included.
• If there\'s no \"Tested\" note in description, it was not tested.
• The images shown for our products are taken from representative items, so for orders with more than one item, actual appearance may differ slightly. Please ask us to send you more detailed pictures if needed.

Thank you for viewing, and welcome to see other items at our store!

We also offer professional repair and exchange services
for GE/FANUC products.
Call [phone removed by ] or visit [link removed by ]Return policy

Within14 days after recieving this item and if you believe that I misrepresented it, please email me to set up a return. All return postage or freight will be payed by the buyer and it must be returned in the same condition that it was shipped. Thank You

Shipping policy

All shipping rates are handled by the buyer.

---