Icom IC-910H VHF/UHF High Power transceiver ALL MODE WITH DSP OPTION VERY CLEAN For Sale

VERY CLEAN NICE WORKING TRANSCEIVER. COMES WITH ONE DSP UT-106. IT HAS THE HAND MIC ORIGINAL MANUAL AND POWER CORD. THIS IS ICOM AT ITS BEST.
The Icom IC-910H sets the standard in amateur radio satellite radios. The IC-910H contains a full 100 watts of power on VHF, eliminating the need for an external high power amplifier for satellite uplinks. For mode-J satellites, ICOM provides 75 watts of output on UHF. With dual high sensitivity DSP compatible receivers, weak signal DX and satellite communications are second to none. Optional preamplifiers for each band are available for installations requiring additional receive gain. The optional UT-106 DSP units can be added to both bands for noise reduction and improved signal to noise ratio.
Packet operation has never been easier. The IC-910H contains two data sockets for simultaneous packet operation on the main and sub bands. New high-speed PLL lockup times were added to make high-speed 9600 bps packet more reliable. A transceiver modulation input limiter stops modulation anytime the input level to the radio is exceeded. ICOM also added an easy to read 3.5 inch display. Coupled with a 10-key entry pad, direct frequency or memory channel control are at your fingertips. Plus you get 328 memories (39 regular, 1 call, 6 scan edge for each band plus 10 satellite). The rear panel features an antenna input for 2 Meters [SO239] and one for 70 cm [N]. These features don\'t come at the expense of size, measuring only 9.5 x 3.6 x 9.5 inches and weighing 10 pounds (240x90x240 mm 4.5 kg), the IC-910H is ready for Field Day or any other portable operations that require a top notch, all mode FM/CW/SSB, VHF/UHF transceiver. Without a doubt, the IC-910H sets the standard for satellite operation. The IC-910H includes an OPC-657A DC power cable and HM-36 hand microphone.

---