When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Battlestar Galactica - new series version - FanArt 3D model - painted or raw print
3D PRINTING:
• The model is printed in PLA pro filament.
• This size is 12.4” model.
INCLUDED:
• 1x TOS Galactica (painted, weathered)
• 2x stands
• 1x Plaque
• Model is a multi-piece model that requires assembly. In the fully hand painted model, I assemble it so that the model finish flows well as shown.
• Printed in 12k Hi-res UV resin
• 3D printed models may show layer lines, as pictured upon zooming in, since the models are printed layer by layer - this is always the case with 3D printing of any kind. We use high-res printers so the detail on these will be on par or better than production pieces.
• Model can be painted once it is sprayed or painted with a base or a primer and made to look amazing for your custom designs. See my example and order a hand pre-painted model!
• This MODEL COMES UNPAINTED normally. It will be painted roughly how shown in the pictures if you choose painted option.
• Made-to-order. Usually takes a few days to a couple of weeks to print and get ready. Expect several days to 1+ week(s) before model is on its way, at a minimum.
AVAILABLE:
1) RAW, unpainted 3D print - assembled or not - message how you want it, otherwise it will be unassembled.
2) PAINTED option - Painted roughly as shown in pics. Variation is expected as each model is hand painted.
3) DIY KIT - which includes 1) The 3D printed model, 2) paint for the model, 3) and brushes.
4) SIZES - this model standard size is 9” but can be made as large as 32”. Please ask us for the size you want.