BSA - British Classic BSA Motorcycles Sew on Iron on Embroidered- Patch For Sale

1. 1. Lay your cloth on aflat, heat-resistant surface like an ironing board. To ensure the item willprovide a good surface for the patch, iron it first. If it's a backpack oranother item that's difficult to iron, do your best to arrange it so that thepart of the fabric that will be receiving the patch is flat against a hardsurface.

2. 2. Place the patch inthe position you chose.The adhesive side should be flat against the basefabric. Make sure that the patch isn't crooked. On embroidered patches, theadhesive side is the underside.

3. 3. Heat up aniron.Turn it to the hottest setting your fabric can tolerate. Make surethe "steam" option is turned off, and that your iron isn't full ofwater.

4. 4. Place a thin towelover the patch.Take care not to disturb the position of the patch. Thetowel will protect the patch itself and the surrounding fabric.

5. 5. Position the heatediron over the patch and press down.Hold the iron there for about 15seconds. Apply as much pressure as you can by pressing down firmly.

6. 6. Remove the iron andallow the patch to to cool.Lift the towel and check to see whether thepatch is fixed on securely by gently rubbing at the edge with a finger, tryingto lift it. If it lifts up a bit, replace the towel and press it with the ironagain for 10 seconds.

response

Please contact us before leaving a negative response

Thanks