Yaesu FAS-1-4R Remote Antenna Selector & Yaesu FAS-1-4R Antenna Switch For Sale

The original Yaesu FAS-1-4R Remote Antenna Selector was designed to work with the Yeasu FT-7200 Tuner. I\'m basing the rest of this on an assumption that a lot of hams must have wanted to use the selector and Yaesu produced the FAS-1-4R Switch so the antenna could be used on other radios. I purchased the selector/switch from a fellow ham who never used it outside. It has no wear on the outside box and the switch looks brand new. On one of my towers I had a H frame assy. that I mounted a 2m/440 beam on the bottom leg, on the top of the leg I had a Diamond 2m/440 vertical.. In the middle support I had a Antron 99 for working local 10 meters. On the other vertical leg was a 6m three element beam and on the top I had a 6mtr Ringo Ranger. All of the coax on the tower needed to be replaced so I bought the Selector/Switch so I wouldn\'t require as much coax. I don\'t have the book but hooking it up is a no brainer. I have taken apicture of my H frame which will make sense regarding the antenna location. It only has a four plug connector. The No 1 position is the default setting and I was going to hook my 2mtr/440 vertical to it. The switch box runs off 12 volts. The cable isn\'t real long because Bobkept the switch indoors. It is almost impossible to find the switch box, which is whyI am asking what I am asking.

Thanks for Looking

73

Michael L. Otis

k0tis