When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Swan 1200 Cygnet Linear
Here is a nicely restored Swan Electronics Model 1200-W Linear Amplifier,rated 1200 watts PEP Inputin SSB mode, and 800 watts DC Input in CW mode.
The amp is very low profile and will look nice next to any transceiver. (13 widex 10-3/4 deep x 5-3/4 inches high)
The frequency ranges are: 3,000-4,500kc., 6,000-9,000kc., 13,000-16,000kc., 16,000-20,000kc., and 23,000-35,000kc. so it should work on a couple of the WARC bands.
There were two versions of this amp. The second version used the more expensive 8950\'s This one uses fourof the less expensive, and easier to find6LQ6 Tubes. (substitute tubes that can be used are 6JE6.6ME6 and 6MJ6)
Restoration included recapping the power supply, replacing the AC cord and plug, replacing the pilot and meter light with an LED bulb, burnishing the relay contacts,cleaning switch contacts, and doing the relay modification toallow use with non-Swan radios.
Cosmetically there is not a scratch 9+
Comes with a scan of the manual.
This is a nice little amp in that will look great next to your radio.
offer now