When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Now available for your inspection under power and purchase at our JV Partners Warehouse in Cincinnati, Ohio is this \"ABSOLUTELY BEAUTIFUL\"NardiniModel 25120T25\"/33\"swing X 120\" cc Geared Head Engine Lathe, w/Taper Attachment and Inch and Metric Threading.We have run this machine through all speeds and feeds and find it to be in Excellent Operating Condition. Further, it is equipped with a very desirable 4 3/4\" Spindle Hole, Power Rapid Traverse in Both Axes, Inch and Metric Threading, Removable Gap, Steady Rest, Digital Readout (DRO), and Taper Attachment. TheseNardini Engine LathesareExcellent Engine Lathes Built With a Lot of Quality in Brazil.
Specifications are as follows:
NARDINI GAP BED ENGINE LATHE
MODEL: IN-25120T
SERIAL NUMBER:
GENERAL SPECIFICATIONS
Swing Over Bed: 25-5/8\"
Swing Over Cross Slide: 17-5/16\"\"
Swing In Gap: 33-7/8\"
Distance Between Centers: 120\"
Cross Slide Travel: 15-9/16\"
Top Slide Travel: 7\"
Spindle Bore: 4-3/4\"
Spindle Nose: A1-11\"\"
Spindle Speeds: (18) 16 to 1250 RPM
Tailstock Quill Diameter: 3-9/16\"\"
Tailstock Taper: No. 5 M.T.
Tailstock Quill Travel: 10-7/16\"
Number of Threads: 264
Metric Threads: (70) .40 to 35mm
Inch Threads: (61) 2-42 TPI
Module Threads: (68) .20 to 15
Diametral Pitch Threads: (65) 1-1/2 to 84
Pitch Of Leadscrew: 4 TPI
Number of Feeds: 216
Longitudinal Feeds, Inch: .0033 to .2653in/rev
Longitudinal Feeds, Metric: .085 to 6.740mm/rev
Cross Feeds, Inch: .0008 to .0663 in/rev
Cross Feeds, Metric: .021 to 1.685 mm/rev
EQUIPPED WITH
20 HP Motor
Four Way Power Rapid Traverse
Digital Readout
Hardened Bed Ways
20\" 3-Jaw Chuck
Taper Attachment
Thread Dial
Splash Guard, Chip Pan, Coolant System
Approximate Weight: 12,000 Lbs.
F.O.B. Cincinnati, Ohio 45223
ALL SPECIFICATIONS SUBJECT TO VERIFICATION BYPURCHASER
Note: There is some light scoring on the ways.
You can see this very nice machine tool under power at ourJV Partners Warehouse inCincinnati, Ohioby calling Andy or myself for inspection (see phone numbers below).This is a Nardini Model25120T Geared Head Engine Lathe built with a whole lot of quality inBrazil. Overall, a \"Great Operating, Great Looking\"Engine Lathethat is ready to go to work. The appearance speaks for itself (see photo\'s). If you need a good late modelEngine Latheof this size, don\'t pass up this opportunity. You will have no regrets if you buy this machine.
We believe the new owner of thisNardini Model25120T Geared Head Engine Lathe will be very happy with it.
We invite you to check our response and you’ll understand that we properly describe our items. The condition we state an item is in, is the way it will be when we ship it. We will load, free of charge on any truck or trailer. You always buy with confidence at Machine Tools of America. First of all, our descriptions are as accurate as we can possibly make them, and we\'ve been describing equipment for longer than we care to admit. Secondly, we offer our customers a 30 day, freight prepaid, full refund return privilege on everything we sell, unless otherwise specifically stated. If you’re not satisfied that this item is as we represented it to be, send it back to us and we’ll refund what you paid us. Every item we sell, unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse (515 Kercher St., Miamisburg, OH 45342). We request that the successful buyer contact us within 72 hours from commitment to purchase and pays in full for their purchase within 7 days, whether or not they have picked up their machine. We will store your purchase, free of charge, for a reasonable length of time, if time is needed to arrange for shipping. We accept Company Checks, Personal Checks, Bank Checks, Certified Checks, Bank to Bank Wire Transfer, Credit Card, PayPal, or even Cash.
We are:
Machine Tools of America and you can contact us by phone: Bruce at 937-545-8475 or Andy at 937-604-6031. Our fax is 937-866-6668 or 937-866-8514 and the office phone is 937-866-8334, but we’re seldom there.
For ground shipping on flat bed, single drop deck, or double drop deck trailers, we recommend you contact the following: White Brokerage, Inc.; toll free phone number 877-922-4212(ask for Pat or Ellie), A&P Freight Services; toll free number 800-628-6419 Ext 225 (ask for Paul), Best Ways Brokerage Inc.; toll free number 800-426-1220 (ask for Mark), Fastway Transport, Inc.; toll free number 800-817-2381 (ask for Chris). All four (4) of these companies are located in northwestern USA and are very adept at organizing partial capacity shipments at favorable prices to anywhere in North America.
Inform them that they will pick up your machine at Machine Tools of America’s warehouse at 515 Kercher St., Miamisburg, OH 45342. TheNardini Engine Lathewill weigh approx. 12,000# and occupy 16’ of bed space. Further, inform them it needs tobe tarped.