Mosin Nagant Straight Down Bolt w/ Custom Knob For Sale


Mosin Nagant Straight Down Bolt w/ Custom Knob
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

Mosin Nagant Straight Down Bolt w/ Custom Knob :
$85.00

All New Product...... from the makers of fine items by MNRITZ22.

Please view most of our products through thefollowing U- Tube link …….

Warning: Some sniper bolts, available on andother sites, maybe either soldered, epoxy or screwed (NOT WELDED). Some vendorscarry all 4, and you will not know what you will be receiving till you get yourorder, unless you ask them. Ours are TIG WELDED (shaft to body) by a certifiedprofessional.


This is our standard Straight Down bolt design (tigwelded w/ no serial number), but with a twist. We have added a custom designedknob. It is made from aluminum (less weight than steel) that is Black Hard Coat Anodized. This knob is attached with DEVCON Epoxy. This product will not work well (alot of adjustment) with stocks that are usinga long eye scope mounted over the receiver action (if you have thiscombination, use our ATI/Archangel Bolt). The pictured bolt willwork GREAT if you are not using a scope, or you are using a PU Russian scopemount. Please read below the section \"Which Bolt Should I choose\".


****** IMPORTANTLEGAL/SAFETY NOTICE ******

“It is the buyer’sresponsibility to have the entire rifle and head spacing professionally checkedprior to shooting the rifle, when there has been any change to the boltassembly, receiver or barrel. This also includes, the addition of anynon-standard items added to any part of the rifle”.

We have other items listedon for Mosin Nagants that you will find interesting and useful (See OtherItems in “Seller Info” box here and atMNRITZ22 ).

Questions and comments arealways appreciated. US and Canada Sales ONLY. RETURN POLICY: Buyer shouldcontact me within 7 Days after receiving this item. The buyer has 14 days toreturn the item (the buyer pays shipping fees). The item will be refunded.Immediate payment is required.

Enclosed (shipped) withitem, is a “Buy Back” offer for your old piece.

Good luck, fire safely and\"God save our country and the 2nd Amendment\".

Which Bolt Should I Choose ???

Our standard Straight Down and Slant Back bolt will work just fine on the ATI, Archangel and on the Original Wood stocks. You will not have to inlett where the bolt rests in the locked position with these bolts, but if your scope mount (not the scope) extends more than 2\" over the breach opening (from front to back), you may be in the path of travel of the bolt. The Straight Down and Slant Back Bolts rides higher than our ATI/Archangel Bolt (low profile). For the scope mount to extend back farther than 2”, the bottom of the scope mount will need to be 1” higher (or more) than the top of the breach for the Straight Down and Slant Back Bolts.

The ATI/Archangel Bolt is a much lower profile than our standard Straight Down and Slant Back bolts and will work fine on the ATI & Archangel stocks, with a scope mount that extends well over the breach area, as long as you have a clearance of at least 5/8\" (or more) over the breach opening. However, depending on the width of your scope mount, if you go back too far at this low profile, you may impair the shell ejection process. Because of the varying thickness of the Archangel stocks, where the bolt rests in the locked position, you may have to inlet that area no more than 1/8” for the bolt handle to achieve a proper fit in the locked position. This can be easily done with a cone shaped dremill stone. This is a problem that ProMag (Archangel) knew about 3 months after production started. Their web site has a video about inletting for the bolt handle. When dealing with Poly Resin products, when they repair a mold and make a copy, it is like making a copy of something and then making a copy of the copy. The mold becomes a little different, usually a bit bigger. About 50% of the people that purchase this ATI/Archangel bolt do not have to inlet at all, and the other 50% do have to inlet some as per above. The ATI/Archangel Bolt WILL NOT work well at all with the Original Wood stock. You would have to do some major inletting in the area where the bolt handle comes to rest in the locked position.

We would recommend that you get the bolt that best fits your needs, and then purchase a scope mount that will work with the bolt, not the other way around. If you already have a scope mount on your rifle, then follow the above information.


Buy Now


Other Related Items:



Related Items:

WWII SOVIET RUSSIA M1898 MOSIN NAGANT RIFLE CANVAS CARRY SLING picture

WWII SOVIET RUSSIA M1898 MOSIN NAGANT RIFLE CANVAS CARRY SLING

$23.96



Mosin Nagant 91/30 M38 M44 extractor Tula Izhevsk. Original Russian surplus picture

Mosin Nagant 91/30 M38 M44 extractor Tula Izhevsk. Original Russian surplus

$34.00



Original Russian Mosin Nagant Stripper Clips 7.62x54r Izhevsk  91/30 With Box  picture

Original Russian Mosin Nagant Stripper Clips 7.62x54r Izhevsk 91/30 With Box

$37.00