When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Atrump Manual Knee Mill MODEL: 2VSG
l 3HP Spindle Motor, R8 Spindle Taper
l 4,200 rpm spindle speed with HI-LO gear
l Hardened & Ground with turcite-B coating guide way
l C7 Double nut precision acme lead screws for high accuracy and long lasting
l FC30 Meehanite Casting main frame with annealed & stress relieved for long term reliability
l Anti rust chrome quill
l Standard way covers on all three axes
l Tool box & Tools
l Precision APEC class7 spindle bearing to ensure spindle run out within 0.0002
l One shot lubrication system
l Built-in Quartz work light
Specification:
Table: 9” x 49”
Longitudinal travel (X-axis): 36”
Cross travel: 12”
Quill travel: 5”
Knee travel (manual): 16”
Quill diameter: 3.375” (86 mm)
Spindle nose to table top (D): 0.75”-16.75” (20-426 mm)
Load capacity: 600 lb
Spindle taper: R8
Spindle Speed (r.p.m.): 70 to 4200 rpm Hi/Lo gear
Transmission of spindle & motor: Timing Belt
Spindle center to column front surface:
6.875” to 27.875” (175-707 mm)
Ram Travel: 12”
Head:
Swivel (left/right): 90 degree
Tile (front/back): 45 degree
Motor:
Spindle motor/max torque: 3HP (Std.)
KVA rating:4KVA, 15amps
Coolant pump (optional)1/8 Hp
Lubrication pump: one shot
Power requirement: 4 KVA, 3 Phase 208-230 voltage
L X W X (LXWXH): 101” x 70” x 82”
Net Weight: 2,600 lbs. (1182 Kgs)
Additional shipping instruction:
All machine packed on wooden skid.
Shipping Cost:
Buyer will pay for all shipping costs.
The Truck which deliverthe machinemust be aFlat bed or step deck truck, with Air Ride system.No Van or enclosed trucks are accepted. The Skid must be able to be strapped down or chained down to the deck of the truck.
All machines will be shipped on a pallet with shrink wrap for domestic buyer
Local Pickup address:670 Union Ave.Pomona,CA91768Local pickup is available from8am-12pmand1pm-5pm. Please contact usjcmachineonline@gmail.comfor any questions.
All sales and local pick up in the state of California must pay for the local sales tax
Seller charges sales tax for items shipped to: CA. Buyer pick up at Pomona, the sales tax is 9%.
Shipping Cost: Buyer will pay for all shipping costs. Seller will arrange the shipping to buyer’s location under the following freight cost: $800 for Pacific Standard Time zone, $1,000 for Mountain Standard time zone, $1,200 for Central Standard time zone & $1300 for East Standard Time Zone. This freight does NOT INCLUDE the unload machine rigging fee, Buyer need to arrange the forklift to unload the machine in buyer’s location or hire in the local rigger to unload as buyer’s expense.
.