300W HF amplifier input 0.3W for SDR Hermes Angelia SSB CW with lpf VRF2933 For Sale

300 W out HF amplifier SSB CW for low power SDR HERMES , ANGELIA ... with lpf 1,8-30 MHz This device is designed for use with modern DUC/DDC low power SDR radios, like HERMES , ANGELIA or others.
With 0.3 - 0.5W input power from SDR it runs solid 300W to your antenna. The amplifier\'s output is filtered by LPF with diplexer, so thesecond and higher harmonics of transmitted signal are suppressed for more than 47 dB. To switch the filters you need simple open-collector circuit or mechanical switch.
First stage is MRF150 class A amplifier and second is 2 x VRF2933 (see schematic). Measured IMD of complete amplifier is -40 dBc.
The power supply requirements is 50VDC 10-12A.
The board size is 165 x 240 mm, but each amplifier and diplexer canbe separated by cutting the PCB to suite your housing dimension.
If comes with our BPF board ( item 191722100589) this device will be controlled by SDR completely: RX/TX switching, band changing and SWR protection becomes automatic through user programmable pins of accessory connector. To protect and control this amplifier the special device is better to use, see item171927308343. This device does not include heatsink. Can be added upon request for extra money. More tech info at .

---